Top Container Chassis Secrets
Top Container Chassis Secrets
Blog Article
A corner fitting is really a fixture consisting of standard apertures and faces which provide a common interface for dealing click here with and securing containers.
Every casting would be to be inspected from the manufacturer for general appearance and area defects. The castings are to get free of charge from defects. Satisfactory records of these inspections are to generally be accessible to the Surveyor.
When adjustments are now being produced to an software or to an approved layout sequence, the submittal is to include at the very least the subsequent:
The container beneath examination would be to be placed on four supports in exactly the same horizontal aircraft; one particular underneath Each individual base corner fitting, with The bottom construction free of charge to deflect, and is also being uniformly loaded to R
the sum of every one of the things of auxiliary warmth included into the container interior for the purpose of the exam, like enthusiasts and blowers, managing heat in kcal/hr (Btu/hr)
Vertically adjustable supporting users of a landing equipment to which sandshoes or wheels are hooked up.
be mentioned that these corner fittings never comply with possibly this or ISO standards. They may be appropriate supplying the maximum top of the bottom on the aperture in The underside corner fittings doesn't exceed 1Z, inches.
The container underneath examination would be to be within an upright situation on agency ground. A load equivalent to 200 kg (440 lb) would be to be suspended from the center in the widest rung. The load should be to be kept in place for 5 minutes then taken off.
The certification of your thermal abilities of a container is always to be to the manufacturer’s design and style inner temperature rating at a certain ambient temperature with the heat decline or attain expressed as the general coefficient of heat transfer in kcal/hr (Btu/hr).
The kingpin should be to be mounted in accordance with ISO 337. option methods of mounting will likely be considered offered They can be no considerably less successful.
When the results of any check just isn't satisfactory, the exam is usually to be repeated on at least two further chassis to exhibit satisfactorily the adequacy of the look.
A vehicle which has a entrance axle load of 5460 kg (12000 lb), 2730 kg (6000 lb) per wheel, should be to be maneuvered around the complete flooring location in a very longitudinal way, generating no less than nine passes. just one go is usually to be made together all sides Along with the entrance wheels as close to the aspect walls as practicable.
A detachable, self-contained assembly of axles, wheels, springs and suspension and brake elements crafted specifically for use as rear wheels under a chassis. in the event the assembly is just not removable, it known as “undercarriage” or “working gear.”
Report this page